Q.
Can I run them through an inkjet or laser printer?
A. Yes we supply high-speed laser labels or inkjet
labels guaranteed A4 label paper, which is 100% compatible and can
be used for both applications. They will also work in most Photocopiers.
Q. Is your laser label A4 Label paper
environmentally friendly?
A. Our face material is recyclable (as its paper) and manufactured from sustainable
sources, the backing is silicon which is not recyclable, but throughout production
we also look to reduce the impact on the environment and any waste is kept to
an absolute minimum.
Q. Your labels are really sticky do you offer an alternative?
A. Our standard stock laser labels are a permanent adhesive labels, we do offer
a removable adhesive label (peelable) which when stuck can be peeled away and
also a freezer adhesive. Contact
us for more information.
Q. I stick my labels to recycled boxes;
can I apply A4 laser labels to other products?
A. Our A4 stock laser labels & inkjet laser have a strong permanent adhesive,
which is great for most types of packaging, and many other surfaces.
Q. What is the best way to feed label
sheets into my printer?
A. Most printer manufacturers recommend that labels be fed into their machine
narrow edge leading. This is the only option for most small office printers or
printers that we might have at home. Some larger machines give the option to
run paper narrow or wide edge leading, but with labels it is still best to run
them narrow edge leading.
Q. Will the laser labels be the same as
my last order?
A.Absolutely, we source the same high speed laser guaranteed paper directly from
the mill every time because our product works so efficiently, why change something
when it is perfect. There can be slight variations from batch to batch but these
will not affect the way the labels run.
Q. How do I get the best out of my A4
laser labels?
A. Simple, a few easy steps:
Depending on your printer make and model you
can tell it via your printing software or the printers
control panel that you want to run laser labels.
Setting you machine up in this way will help to
ensue best possible results & reliability.
Due to the” sandwich” like construction of label material
it is important that your latest delivery is allowed
to “Acclimatise” to
your local conditions for approx 48 hours. To do
this just keep the sheets in the boxes and inner
bags they came in. And positioned close to the
printer in which they will be used. Avoid storing near direct heat
sources such as radiator, widows etc.
Stack the boxes no more than 5 high.
If you have bulk storage that is not adjacent to
the printer, this is ok, but always allow the product time to acclimatise
before printing as detailed above. In bulk storage the product can
tolerate quite wide ranging temperatures of 5 to 30Deg C without
suffering any permanent damage.
Before loading the next wad of labels to your printer
don’t be frightened to handle them. Flexing and fanning will
help the sheets feed and run more reliably..
Q. I have heard that recycled toners can
be a problem with labels?
A. Yes this is true, the label industry as recommends using original
toners for the very best results. The most likely
problem you may experience from recycled toners
is poor toner adhesion. (Toner has not been properly
fused, leading to smudging and poor image quality).
Q. How easy is it to set up the print
for your labels?
A. Most of our label layouts are compatible we
the pre-formatted layouts contained within Microsoft Word, Access,
Excel etc and many other software programs And then it’s usually
a case of identifying the label size and number on the sheet and
away you go!
Q. Do you put any of your own advertising on the paper?
A. Definitely not, we feel this spoils the product, as we want you to promote
your business and reflect the professional transactions to your clients. All
our stock laser label sheets are plain high white. A back print can also be a
problem if you need to photocopy a sheet, as the back print will often show through
enough to mark the copy. On special orders we can print “which way” the
labels need to be feed, or loaded in a printer, we do here of customers printing
up side down on the backing sheet.
Q. What else are labels known as?
A. Avery labels*, Delivery notes, Picking sheets, Picking labels, Label paper,
Packing notes, Picking slips, Pick Slips, Return forms, A4 stock laser labels,
Die cut laser labels, Peel out labels, Butt cut laser labels, Label paper, Address
labels, Pallet labels, Laser labels, Freezer sheet labels, Sheet labels, Despatch
Labels, Dispatch Labels, Consignment Labels, Laser Sheet Labels, Jam Free Labels
* , Copier Labels, Ink-Jet Labels, Jet Laser Labels, Laser Jet Labels, Drum Labels,
Haz-Chem Labels, Stock Labels, Data Labels, Digital Labels, Printers Blanks,
Universal labels, Multi-Print Labels, Multi-Purpose labels, Bay labels, Internet
labels, Plastic labels. * Maybe an Avery Copyright name.
Q. Can cheap-laserlabels.co.uk supply printed labels?
A. We can print 1 – 7 colours face or reverse, add your logo or any other
promotional ideas you may have. Click
here for more information..
Q. How many sheets are per box?
A. Each box contains 500 A4 Label sheets, the boxes are double Walled and shrink
wrapped to protect in transit. To keep the product at its best within the box,
we bag the labels in 250sheet lots. This removes the any possibilities of any
moisture getting into the pack and affecting the quality. As a special order
we can also supply in 5 mini packs of 100 sheets within the 500 sheet box.
Q. I am looking for a different sized label than your stock laser
labels?
A. We can supply labels in any position to suit your specific requirement on
A5, A4 Label paper, A3 or even SRA3 Laser Sheets. Click here, perfect if you
require more than one label.
Q. I need regular deliveries?
A. We can set up a standing order and the possibility of a small discount.
Q. Can I have a credit account?
A. After consideration, regular orders over £500 + vat subject to our
terms & conditions.
Q. Can my sheets be pre- printed with a corporate logo?
A. Yes, we can print any colour logo you require click
here for more information..
Q. When are the goods despatched?
A. Boxes are sent on a next day consigned service where possible using DHL, Business
Post and City Link and many other courier companies, orders over 20 boxes are
sent by courier using a pallet service. On each of despatches a representative
of your organization will be required to sign for the consignment ensuring that
it arrives safely and correctly.
Q. I’m looking for a PP1 (Posted Paid)?
A. We can print this directly onto your document but you will need to contact
Royal
Mail for the correct logo. Click
here for more information.
Q. Your paper is a really bright white compared to my previous supplier;
will an exact re-order be the same?
A. Most definitely, we source an ultra bright white laser face paper direct from
the mill and feel that visually our product is better than the competition and
also if you require us to print the label sheets, our colour logos look more
defined and professional. All subject to normal production variations of course!
Q. Can you tell me what software or programs your labels are compatible
with?
A. Actinic Express, Amazon, AShop, Balans, BluePark, Brick Technology, Channel
Advisor, Cre Loaded, CubeCart, eBay Selling Manager, eDirectory, EKM Powershop,
eShopFitters, Firepages, Glassraven , Google Checkout, Invoice2Go, Kynet,
JShop, LiquidShop, MailOrderWorks, Microsoft Word, Access & Excel, osCommerce*,
OSMax, PayPal, Playtrade, Roman Cart, 1StopOrders, VengaCart, X-Cart, ZenCart.
*Almost any HTML based application.
Q. Are the labels available in any colour other than white?
A. You will see the various items and colours that we hold in stock, however,
we can arrange via a bespoke production for them to be printed in any colour
you require.
Q. Why is there a choice between square or round corners, Butt cut labels,
Die cut Labels?
A. There are some historical technical reasons why we have both but today the
materials are so good you can choose exactly the style and size that suits you
best. The square cornered labels tend to be slightly larger for any given number
of labels on a sheet but the round corners tend to look better in most peoples
opinions! The range guide shows whether the item has square or rounded corners!
Simply Butt cut have square corners, Die cut have round corners.
Q. Where is our stock stored?
A. All of our stock is stored in a temperature and humidity controlled storage
facility. This ensures that when your goods arrive, they are in the same perfect
condition as when they went into the box. But please always follow the guidelines
in the section “How to get the best out of my A4 laser labels.
Q. How long would a bespoke production take to deliver?
A. This is negotiable on each order and will be agreed with you on each occasion
to ensure that it is acceptable.
Q. Can I have any other shaped labels other than rectangular?
A. The range does have some circles already, but via, a bespoke making, you can
have just about any shape or mixture of shapes that you like – An ideal
marketing campaign tool.
Q. What temperature ranges can your laser labels withstand?
A. Up to 200deg C for very short periods. I.E. Whilst being printed. But in normal
use the labels can be applied in temperatures as low as 5Deg C and once on will
withstand temperatures from –20 to + 80 Deg C. (Assumes the surface that
the label was applied to was clean, dry and in generally good condition).
Q. I cannot find the label I require?
A. Click here for more information.
Q. My labels are not what I expected, what should I do?
A. Click here for instructions.
Q. Do you have a minimum order quantity?
A. You can buy any of the labels listed on the site and many other materials
and sizes besides from just one box of 500 sheets!
Q. Can you send me samples / sample packs?
A. Yes we can provide samples when requested.
Q. What format would I need to supply artwork in for my bespoke order?
A.Adobe, PDF, we can work with more artwork supplier, we have the latest studio
design equipment so can even create from scratch.
Q. What should I do if my labels that I receive are damaged?
A.Please let us know ASAP we will offer you a refund.
Q. Do you supply outside the UK?
A.Yes we can deliver throughout Europe.
Q. I cannot find the label I require?
A. Click here for more information.
Q. My labels are not what I expected, what should I do?
A. Click here for instructions.
Q. What
is a Peelable adhesive? (REM)
A.Removable, or Non Permanent is a peelable adhesive which is probably
the best description is an adhesive who's design
purpose to enable the label to at some stage in its life to be removed from the
surface to which it was applied without damage to that surface. Ironically,
what we really want from a Non-Perm label is that
it sticks totally until that moment we want the label off, at which point we
would like it to fall off on its own!!! Sadly it’s not that easy and the
science of adhesives becomes the art or picking the right compromise,
between how well you want the label to stay on, versus how easily you
want to come off! Made much more complicated by the surface you are
applying it to, the way it’s applied and the environment
it then lives in!
The golden rule of Non Perm labels is try before
you buy! Make sure it will do what you want it to do with our samples
(available upon request)
White Paper with Removable adhesive
(REM)
A bright white, multifunction uncoated paper designed for ink jet,
laser, and photocopiers.
Face material properties
Grammage 70 gsm
Caliper (thickness) 90 microns
Adhesive
A low tack water based rubber removable adhesive
with applications on a varied range of surfaces,
the peel ability of the adhesive once applied depends on the material being
labelled, the surface shape, & the temperatures during application & storage.
Because of these factors it is always recommended
that testing is appropriate prior to usage. As it is a soft adhesive it
can become more permanent in colder conditions, which should be taken into
consideration. Stock removable adhesive is not recommended for plasticised
PVC, leather or suede. Adhesion to cardboard and polyethylene is good
and removability from polar surfaces e.g. glass is
good
Minimum application temp. -10°C
Storage range once applied -30°C to +80°C
Backing
A white woodfree kraft backing paper
Thickness 55 microns
Grammage 52 gsm
Q. What are Media Labels?
A.Not quite the market it used to be. But the biggest
seller is CD labels, disc labels and DVD labels.
With a few VHS labels, Floppy, labels still being
ordered. Especially for inkjet labels as the quality
is much higher visually.
Gloss white photo quality paper with a permanent adhesive
A gloss white, special coated paper giving exceptionally
high resolution print results on multicolour inkjet
printers. This material is commonly used for cd & promotional labels
Face material properties
Grammage 85 gsm
Caliper (thickness) 115 microns
Adhesive
A high tack, permanent adhesive used in conjunction
with A4 labels. This adhesive shows good adhesion to a wide variety
of substrates, even at low temperatures.
Minimum application temp. +5°C
Storage range once applied -20°C to +100°C
Backing
A white woodfree kraft paper with good lay-flatness & stability
Thickness 71 microns
Grammage 67 gsm
Q. How do waterproof labels work? (MWP) (MWPE) (GWP) (MTP) (GTP) (GTPP)
(GCP)
A.We are into how long is a piece of string territory here.... So you need a
label that could survive getting wet, so the next question is how long and under
what conditions! For a short period you can get away with some of our Semi Gloss
Paper (SGW) and in the other extreme you may want to label some chemicals
that fall under the requirements of BS5609, where the labels must withstand saltwater
immersion and abrasion testing as if they had been washed off a ship and
run up a beach! Our MWP & MWPE materials both meet BS5609
Matt white polyethylene with a permanent adhesive – BS5609
part 2
approved (MWPE)
A special matt white polyethylene (PE) specifically designed for use on ‘hot
fuse’
printer systems (laser & copier) and in some cases the material can be printed
using
inkjet technology, but testing is required. This material also conforms to BS5609
part
2 for marine immersion.
Face material properties
Grammage 105 gsm
Caliper (thickness) 180 microns
Adhesive
A clear permanent, acrylic based adhesive with good tack & adhesion on a
wide range
of surfaces. Specially designed for the labelling of chemical drums.
Minimum application temp. +5°C
Storage range once applied -30°C to +100°C
Backing
A siliconized special kraft paper with good lay-flatness & stability.
Thickness 84 microns
Grammage 80 gsm
Q. What are the types of tear proof Labels? (MWP) (MWPE) (GWP) (MTP)
(GTP) (GTPP) (GCP)
A.As with waterproof, tear proof labels is slightly misleading in that anything
can be torn/split eventually but any of our plastic labels provide a good degree
of tear resistance at their die cut edges. However, if you need tear resistance
after the label is punctured then things are little trickier and a special material
may be required sometimes called Vinyl labels. MWP is very tear resistant in
both directions from a die cut edge. The MWPE material is softer and more inclined
to stretch before it tears; usually splits are worse down the long direction.
Q. Avery Labels frequent codes?
AQ. Avery Labels frequent codes?
We sell every compatible Avery laser labels as well as Avery Inkjet labels size
and with the possibilities of adding colour and different self adhesive backing.
Compatibles like Avery Clear, Avery quick peel are also included.
Avery Compatibles labels are guaranteed to work on your laser printer
Avery labels provide a label for almost all needs. They can be used for address labels and mailing labels media for both inkjet and laser. Our templates are available in Microsoft Word and PDF format. Our compatible Avery laser labels are jam-free for trouble free printing. Laser printers and Inkjet printers print great results, whilst leaving no residue which can build up on rollers over time. We don’t offer Avery quick peel laser labels at present which might save some of your peeling time, Avery quick peel allows for quicker and easier detachment of labels. We do offer a similar solution but this is a custom making and only on larger orders. They are also compatible with the Royal Mail Smart Stamp.
*Where applicable our products are the same size & format as the AVERY product reference shown above. These product references are used because they relate to size formats that are found with most software packages. Cheap laser labels lists its own product codes along side these to enable you to cross reference with the software used. We acknowledge AVERY and AVERY product references are the trade marks of the AVERY DENNISON GROUP and that cheap laser labels.co.uk products are not made or endorsed by the AVERY
DENNISON GROUP.
Where applicable, our products are the same size format as the Avery product references (e.g. L7163 or J8163) shown Where applicable, our products are the same size format as the Avery product references (e.g. L7163 or J8163) shown above. These product references are used because they are size formats that are found in most software packages. We list the product references along with our own Label Planet Ltd code for your easy cross referencing with the software. Avery and Avery product references are the trade marks of the Avery Dennison Group. Label Planet Ltd products are not made or endorsed by the Avery Dennison Group.
above. These product references are used because they are size formats that
are found in most software packages. We list the product references along with
our own Label Planet Ltd code for your easy cross referencing with the software. Avery
labels and Avery product references are the trade marks of the Avery Dennison
Group. Label Planet Ltd products are not made or endorsed by the Avery Dennison
Group.
Q. What are the tempreture for Freezer labels? (DF)
A. Our standard freezer labels can go down to -20 deg if applied
in good conditions, however for true deep freeze applications
and for blast freezing you need a true deep freeze adhesive which
will enable the labels to still stay attached at -40 deg. A true
deep freeze adhesive can in most cases also be applied to already
frozen items, where the standard labels need to be applied above
+5 deg.
White Paper with Deep Freeze adhesive (DF) A bright white,
uncoated paper with a smooth finish giving good quality
print results using ink-jet & toner systems. The
material is designed for use on most laser printers & copiers
especially mid to high-speed machines.
Face material properties
Grammage 71 gsm
Caliper (thickness) 85 microns
Adhesive
A permanent, acrylic based adhesive with good tack & adhesion
on a wide range of surfaces in deep freeze conditions. This adhesive
also complies with the German BgVV for indirect food contact & short
term contact with dry & moist food.
Minimum application temp. -20°C
Storage range once applied -40°C to +60°C
Backing
A bleached kraft paper with good lay-flatness & stability
Thickness
71 microns
Grammage 76 gsm
Q. Do you sell A3 laser labels?
A. Yes, all of our materials can be supplied in A3
laser labels or SRA3 sheet size with or without die cut labels. However,
these will mostly be subject to minimum quantities so please send us
your enquiry! See also our range of SRA3 sheets held in stock.
Q. What are Block Out labels? (O)
A. treatment to the adhesive or on the backside of the paper that gives
much increased opacity, allowing effective covering of previous printed
information. Great for covering up old bar codes, prices, addresses
etc!
White Opaque Paper with a permanent adhesive (O) A plain white matt paper with an opaque black coating on the
reverse side.
The same range of overprinting methods & applications as
our plain white permanent stock products plus the benefit of
a label that can cover up incorrect printed information on packaging & leaflets
etc without any show through.
Face material properties
Grammage 85 gsm
Caliper (thickness) 81 microns
Adhesive
A permanent, black, acrylic based adhesive with good
tack & adhesion on a wide range of surfaces. The high heat
resistance of the material allows clean running
through laser printers.
Minimum application temp. +5°C
Storage range once applied -20°C to +60°C
Backing
A bleached kraft paper with good lay-flatness & stability
Thickness 78 microns
Grammage 75 gsm
Q. Whats a Hi Tack label? (HT)
A. For poor quality packaging or a rough surface
where the standard adhesive just hasn't quite got the grab you
need.
White Paper with high tack adhesive (HT)
Face material properties.
A bright white, surface –sized wood free paper with good
opacity
Suitable for Most print methods. Including, Litho,
All forms of dry toner, Ink-Jet Mono and various other digitally
based over print systems. It will carry full colour print but
is not suited to detailed work and should be assessed in detail
before being used in such applications.
Grammage 71gsm
Caliper (thickness) 85 microns
Adhesive
A good permanent, high tack acrylic based adhesive
with very good initial tack and excellent long
term adhesion, over a wide range of surfaces. This adhesive also complies
with the German BgVV for indirect food contact & short
term contact with dry & moist food. Recommended to be used
in conjunction with our Window trim feature.
Minimum application temp.
0°C
Storage range once applied -20°C to +80°C (up to 120ºC
for five minutes)
Backing
White siliconised Paper. Chosen to aid flatness and
feeding characteristics.
Grammage 76gsm
Thickness 71 microns
Q. Dry-Peel or Business Card labels. (DP)
A. Handles like a label but when you've printed them
they can be peeled of the sheet and the near 200gsm
of material behaves like a business card!
Q. What Colour stock labels are there? (RD) (YL) (BL) (GR) (OR)
A. A range of colour for stock control, days of the
week, general office use mailing labels and address
labels Permanent adhesive and suitable for mono printing
in Laser, copier or Ink-Jet printers.
MULTIPURPOSE (LASER/COPIER/INKJET
PRODUCTS)
Red, Green, Yellow, Blue or Orange paper with a permanent
adhesive
This material is designed for use on medium speed laser
printers, desk-top inkjet & laser printers, & dry toner
copiers. The surface of the material gives a good toner bond & print
resolution. The product is well suited to label applications
involving address & inventory office use.
Face material properties
Grammage 80 gsm
Caliper (thickness) 83 microns
Adhesive
A permanent, acrylic based adhesive with good tack & adhesion
on a wide range of surfaces. This adhesive also complies with
the German BgVV for indirect food contact & short term contact
with dry & moist food.
Minimum application temp. +5°C
Storage range once applied -20°C to +80°C
Backing
A bleached kraft paper with good lay-flatness & stability
Thickness 55 microns
Grammage 58 gsm
Fluorescent labels. (FLLE) (FLGR) (FLRD) (FLOR) (FLMG)
Even brighter and more attention grabbing for when
you really want your label to get noticed
Metallic labels. (GM) (SM)
Another way of making your point or turn an ordinary
address label into something really special! Available in Gold
labels and Silver labels
MULTIPURPOSE (LASER/COPIER PRODUCTS)
Gold & silver metallic paper with a permanent adhesive
A gold or silver coating on a clay coated paper
to give a high satin finish. This material is suited to decorative & quality
primary labels. Testing is recommended for suitability
to each individual printer.
Face material properties
Caliper (thickness) 72 microns
Grammage 97 gsm
Adhesive
A permanent, acrylic based adhesive with good tack & adhesion
on a wide range of surfaces. Suited to high temperatures (through
laser printers & copiers).
Minimum application temp. -5°C
Storage range once applied -25°C to +110°C
Backing
A kraft backing with good lay-flatness
Caliper (thickness) 88 microns
Grammage 83 gsm
See through labels (clear labels): (T) (MTP) (GTP) (GTTP)
All these clear label materials can have deliberate
see through properties The (T) product is a tracing
paper like material that allows the colour and hue of the material
below to show through, giving a non-label look. The (MTP) grade
is very similar but in a plastic form. The (GTP) and (GTTP) are
very clear full gloss materials both in plastic. The (GTTP) grade
has a plastic backing as well as a plastic face, giving
it increased reliability in high speed printers
Matt transparent polyester with a permanent adhesive
A matt transparent polyester (PET) specifically designed
for use on ‘hot fuse’ printer systems. Some slight
curl may occur on exiting the printer but this will
flatten quickly.
This material has a frosted appearance when peeled
off of the backing sheet but gives a no label look once applied
to another surface.
Face material properties
Grammage 55 gsm
Caliper (thickness) 46 microns
Adhesive
A clear permanent, acrylic based adhesive with good
tack & adhesion on a wide rof surfaces.
Minimum application temp. +5°C
Storage range once applied -20°C to +80°C
Backing
A one side clay coated, bleached kraft paper with good
lay-flatness & stability
Thickness 110 microns
Grammage 98 gsmange
Glass clear polyester with a permanent adhesive
A clear polyester film with a special high gloss
absorbent surface coating designed for photo quality
images on multicolour inkjet printers. The material gives a ‘no
label loon CDS & other products.
Face material properties
Grammage 78 gsm
Caliper (thickness) 60 microns
Adhesive
A clear permanent, acrylic based adhesive with good
tack & adhesion on a wide rof surfaces.
Minimum application temp. 0°C
Storage range once applied -20°C to +80°C
Backing
A white woodfree kraft paper with good lay-flatness & stability
Thickness 110microns
Grammage 98gsmok’ ange
Glass transparent polyester with a permanent adhesive
A gloss transparent polyester (PET) specifically
designed for use on ‘hot fuse’ printer systems.
Some slight curl may occur on exiting the printer but this
will flatten quickly. This material is primarily used in the
area of ‘long-life’ durable, tracking labels.
Face material properties
Caliper (thickness) 37 microns
Adhesive
A clear permanent, acrylic based adhesive with good
tack & adhesion on a wide rof surfaces.
Minimum application temp. 0°C
Storage range once applied -20°C to +80°C
Backing
A one side clay coated, bleached kraft paper with
good lay-flatness & stability
Thickness 110 microns
Grammage 98 gsmange
Translucent paper with a permanent adhesive
A semi transparent paper specifically designed for
use on ‘hot fuse’ printer systems. Ideal for applications
using variable information printing such as address & inventory
labels where a natural no label look is required.
Due to the high moisture content of the face material, some curl
may occur on exiting the printer. This will flatten, but multi-fed
sheets should be avoided.
Face material properties
Grammage 63 gsm
Caliper (thickness) 55 microns
Adhesive
A clear permanent, acrylic based adhesive with good
tack & adhesion on a wide range of surfaces.
Minimum application temp. 0°C
Storage range once applied -20°C to +80°C
Backing
A one side clay coated, bleached kraft paper with
good lay-flatness & stability
Thickness 110 microns
Grammage 98 gsm
INKJET PRODUCTS
Matt white high resolution paper with a permanent
adhesive
A matt white, special coated paper with a smooth
finish giving very good quality high resolution print
results on multicolour inkjet printers. This material is commonly
used for cd & promotional labels
Face material properties
Grammage 90 gsm
Caliper (thickness) 118 microns
Adhesive
A high tack, permanent adhesive used in conjunction
with A4 labels. This adhesive shows good adhesion to a wide variety
of substrates, even at low temperatures.
Minimum application temp. +5°C
Storage range once applied -20°C to +100°C
Backing
A white woodfree kraft paper with good lay-flatness & stability
Thickness 55 microns
Grammage 52 gsm
We can offer many other materials; we can add a logo, other
common text or even add the variable for you! We can create special
peel out labels for high volume transport applications and many
more
Environmental
Paper components are either ECF or TCF grade manufactured using pulp from sustainable,
managed resources. All dimensions are nominal target specifications, but may
vary. All products within our range are manufactured under ISO9001:2008
All 'software compatible' avery reference codes are trademarks of Avery Dennison Corporation and that www.cheap-laserlabels.co.uk products are not made or endorsed by the AVERY DENNISON GROUP.
Q.
Can I run them through an inkjet or laser printer?
